Solution Description

SPROCKET  5/8” X 3/8”  10B Series SPROCKETS
 

For Chain Acc.to DIN8187 ISO/R 606
Tooth Radius  r3					sixteen.0mm
Radius Width C					1.6mm
Tooth Width b1					9.0mm
Tooth Width B1					nine.1mm
Tooth Width B2					25.5mm
Tooth Width B3					42.1mm
10B Collection ROLLER CHAINS
Pitch					fifteen.875 mm
Internal Width					nine.sixty five mm
Roller Diameter					ten.16 mm

 

 

Z	de	dp	SIMPLEX			DUPLEX			TRIPLEX
			dm	D1	A	dm	D2	A	dm	D3	A
eight	forty seven.	forty one.forty eight	25	10	twenty five	twenty five	twelve	forty	twenty five	12	fifty five
nine	fifty two.6	forty six.42	thirty	10	twenty five	thirty	12	forty	30	twelve	55
ten	fifty seven.five	51.37	35	10	25	35	twelve	40	35	12	55
eleven	63.	56.34	37	12	thirty	39	fourteen	40	39	16	fifty five
twelve	68.	61.34	42	12	thirty	forty four	14	forty	forty four	16	55
thirteen	seventy three.	sixty six.32	47	twelve	thirty	49	14	forty	forty nine	sixteen	55
14	seventy eight.	71.34	52	twelve	thirty	54	fourteen	forty	fifty four	sixteen	55
fifteen	83.	seventy six.36	57	twelve	thirty	fifty nine	14	forty	fifty nine	16	55
16	88.	eighty one.37	sixty	12	30	64	16	forty five	64	sixteen	60
17	ninety three.	86.39	60	twelve	thirty	69	sixteen	forty five	sixty nine	sixteen	60
eighteen	ninety eight.3	91.forty two	70	14	30	74	16	45	74	16	60
19	103.3	96.45	70	fourteen	30	79	16	forty five	79	sixteen	60
twenty	108.four	one hundred and one.forty nine	75	fourteen	thirty	eighty four	sixteen	45	eighty four	16	sixty
21	113.4	106.52	seventy five	sixteen	thirty	85	sixteen	45	eighty five	twenty	sixty
22	118.	111.55	80	sixteen	thirty	ninety	16	forty five	ninety	20	60
23	123.5	116.58	eighty	16	thirty	95	sixteen	forty five	ninety five	twenty	60
24	128.3	121.62	eighty	sixteen	thirty	a hundred	16	45	100	twenty	sixty
twenty five	134.	126.sixty six	80	16	thirty	a hundred and five	sixteen	45	a hundred and five	twenty	60
26	139.	131.70	85	20	35	a hundred and ten	20	45	one hundred ten	twenty	60
27	a hundred and forty four.	136.seventy five	85	twenty	35	one hundred ten	twenty	45	a hundred and ten	twenty	60
28	148.7	141.seventy eight	ninety	twenty	35	a hundred and fifteen	twenty	45	a hundred and fifteen	twenty	60
29	153.eight	146.eighty three	ninety	twenty	35	one hundred fifteen	twenty	45	one hundred fifteen	twenty	60
30	158.8	151.87	ninety	twenty	35	one hundred twenty	twenty	45	one hundred twenty	20	sixty
31	163.9	156.92	ninety five	twenty	35	a hundred and twenty	20	forty five	120	twenty	sixty
32	168.9	161.ninety five	ninety five	twenty	35	120	twenty	45	one hundred twenty	twenty	60
33	174.5	167.00	ninety five	20	35	120	20	45	one hundred twenty	20	60
34	179.	172.05	ninety five	20	35	120	20	forty five	one hundred twenty	twenty	sixty
35	184.one	177.10	ninety five	twenty	35	one hundred twenty	20	forty five	120	20	60
36	189.one	182.fifteen	a hundred	20	35	120	twenty	forty five	one hundred twenty	25	sixty
37	194.two	187.twenty	100	twenty	35	a hundred and twenty	twenty	45	one hundred twenty	25	60
38	199.two	192.24	100	twenty	35	one hundred twenty	twenty	forty five	a hundred and twenty	twenty five	sixty
39	204.2	197.29	one hundred	20	35	120	twenty	45	one hundred twenty	25	sixty
forty	209.three	202.34	100	20	35	a hundred and twenty	20	forty five	120	25	sixty
forty one	214.8	207.38	*a hundred	20	forty	120	20	50	*130	25	60
forty two	2,199	212.forty three	*a hundred	20	40	a hundred and twenty	20	50	*a hundred thirty	twenty five	sixty
43	224.nine	217.48	*a hundred	twenty	40	a hundred and twenty	20	50	*one hundred thirty	twenty five	60
forty four	230.	222.53	*100	20	forty	120	20	50	*one hundred thirty	25	60
forty five	235.	227.58	*100	twenty	40	*one hundred twenty	twenty	fifty	*130	25	60
46	240.1	232.sixty three	*a hundred	twenty	40	*one hundred twenty	twenty	fifty	*130	twenty five	sixty
forty seven	245.1	237.sixty eight	*one hundred	20	forty	*120	twenty	50	*130	twenty five	sixty
forty eight	250.2	242.seventy three	*one hundred	twenty	40	*120	twenty	fifty	*130	25	60
49	255.2	247.seventy eight	*100	20	40	*120	20	50	*a hundred thirty	twenty five	60
fifty	260.3	252.82	*one hundred	twenty	forty	*one hundred twenty	twenty	50	*a hundred thirty	25	sixty
51	265.3	257.87	*one hundred	twenty	40	*one hundred twenty	20	50	*a hundred thirty	25	60
fifty two	270.four	262.92	*100	20	40	*one hundred twenty	twenty	fifty	*a hundred thirty	twenty five	60
53	275.4	267.ninety seven	*a hundred	twenty	40	*120	20	50	*130	25	60
fifty four	280.5	273.03	*a hundred	twenty	forty	*a hundred and twenty	twenty	fifty	*a hundred thirty	25	sixty
fifty five	285.5	278.08	*one hundred	20	40	*a hundred and twenty	twenty	50	*a hundred thirty	twenty five	60
fifty six	290.6	283.thirteen	*100	twenty	40	*one hundred twenty	20	fifty	*a hundred thirty	twenty five	60
57	296.	288.eighteen	*a hundred	20	forty	*a hundred and twenty	20	fifty	*130	twenty five	60
58	three hundred.seven	293.23	*a hundred	twenty	forty three	*a hundred and twenty	twenty	57	*one hundred thirty	twenty five	sixty four
59	305.seven	298.28	*one hundred	20	forty three	*a hundred and twenty	twenty	fifty seven	*one hundred thirty	25	64
sixty	310.eight	303.33	*100	twenty	43	*one hundred twenty	twenty	fifty seven	*one hundred thirty	twenty five	64
sixty two	321.4	313.forty three	*a hundred	twenty	43	*a hundred and twenty	twenty	fifty seven	*one hundred thirty	25	64
sixty four	331.5	323.53	*one hundred	twenty	forty three	*a hundred and twenty	twenty	57	*a hundred thirty	25	sixty seven
sixty five	336.five	328.58	*100	twenty	43	*a hundred and twenty	20	57	*130	twenty five	sixty seven
sixty six	341.6	333.64	*100	twenty	43	*a hundred and twenty	20	fifty seven	*one hundred thirty	twenty five	sixty seven
68	351.7	343.74	*a hundred	20	43	*one hundred twenty	20	fifty seven	*130	25	67
70	361.eight	353.eighty four	*100	twenty	forty three	*120	twenty	fifty seven	*one hundred thirty	twenty five	67
72	371.9	363.ninety four	*one hundred	20	43	*120	20	57	*130	25	sixty seven
75	387.1	379.ten	*100	twenty	forty three	*120	twenty	57	*130	twenty five	sixty seven
seventy six	392.one	384.fifteen	*a hundred	20	forty three	*a hundred and twenty	20	57	*a hundred thirty	25	sixty seven
seventy eight	402.2	394.twenty five	*100	twenty	forty three	*120	20	57	*one hundred thirty	25	67
eighty	412.3	404.36	*a hundred	20	43	*a hundred thirty	20	57	*a hundred thirty	twenty five	67
85	437.6	429.sixty two	*one hundred	20	50	*one hundred thirty	20	fifty eight	*a hundred thirty	twenty five	sixty seven
90	462.eight	454.88	*one hundred	20	50	*a hundred thirty	twenty	fifty eight	*130	twenty five	sixty seven
95	488.five	480.14	*100	20	fifty	*130	twenty	fifty eight	*one hundred thirty	25	sixty seven
100	513.four	505.40	*100	twenty	fifty	*130	20	fifty eight	*a hundred thirty	twenty five	67
one hundred ten	563.9	555.92	*one hundred	twenty	fifty	*130	twenty	58	*one hundred thirty	twenty five	67
114	584.1	576.thirteen	*100	twenty	50	*a hundred thirty	twenty	58	*a hundred thirty	25	67
one hundred twenty	614.4	606.forty five	*100	twenty	fifty	*a hundred thirty	twenty	58	*one hundred thirty	twenty five	sixty seven
a hundred twenty five	639.7	631.fifty one	*a hundred	20	fifty	*a hundred thirty	twenty	fifty eight	*a hundred thirty	25	sixty seven

Observe: *welding hub

Standard Info.
 

Product name	DIN ISO Regular Sprocket for Roller Chain
Materials Available	1. Stainless Steel: SS304, SS316, and so on
	2. Alloy Metal: C45, 45Mn, 42CrMo, 20CrMo, etc
	3. OEM according to your request
Floor Therapy	Heat treatment method, Quenching therapy, High frequency normalizing treatment, Sprucing, Electrophoresis paint processing, Anodic oxidation treatment method, etc
Attribute	Fire Resistant, Oil Resistant, Heat Resistant, CZPT resistance, Oxidative resistance, Corrosion resistance, and so forth
Layout criterion	ISO DIN ANSI & Buyer Drawings
Size	Consumer Drawings & ISO standard
Application	Industrial transmission products
Package	Picket Case / Container and pallet, or made-to-purchase
Certificate	ISO9001: 2008
Benefit	High quality very first, Service very first, Aggressive price, Quick delivery
Shipping and delivery Time	20 times for samples. 45 times for official order.

Installation AND Making use of

The chain  spoket, as a travel or deflection for chains, has pockets to keep the chain hyperlinks with a D-profile CZPT segment with flat aspect surfaces  parallel to the centre plane of the chain links, and outer surfaces at correct angles to the chain link centre plane. The chain links are pressed firmly in opposition to the outer surfaces and every of the aspect surfaces by the angled laying surfaces at the foundation of the pockets, and also the assist surfaces of the wheel human body together with the conclude sides of the webs fashioned by the major and trailing walls of the pocket.

Observe

When CZPT new chainwheels it is quite critical that a new chain is fitted at the identical time, and vice versa. Using an aged chain with new sprockets, or a new chain with old sprockets will trigger fast dress in.

It is important if you are putting in the chainwheels your self to have the manufacturing facility support manual specific to your design. Our chainwheels are produced to be a immediate CZPT for your OEM chainwheels and as this sort of, the installation should be done according to your versions provider handbook.

In the course of use a chain will extend (i.e. the pins will wear triggering extension of the chain). Making use of a chain which has been stretched a lot more than the previously mentioned maximum allowance causes the chain to experience up the teeth of the sprocket. This triggers harm to the tips of the chainwheels teeth, as the drive transmitted by the chain is transmitted completely by means of the top of the tooth, rather than the complete tooth. This final results in severe donning of the chainwheel.
 

FOR CHAIN STHangZhouRDS

Requirements companies (this kind of as ANSI and ISO) maintain standards for style, proportions, and interchangeability of transmission chains. For instance, the adhering to Table exhibits knowledge from ANSI common B29.1-2011 (Precision Energy Transmission Roller Chains, Attachments, and Sprockets) created by the American Modern society of Mechanical Engineers (ASME). See the references^[8][9][ten] for extra data.

ASME/ANSI B29.1-2011 Roller Chain Common SizesSizePitchMaximum Roller DiameterMinimum Ultimate Tensile StrengthMeasuring Load25

ASME/ANSI B29.1-2011 Roller Chain Regular Sizes
Dimension	Pitch	Maximum Roller Diameter	Bare minimum Greatest Tensile Toughness	Measuring Load
25	.250 in (6.35 mm)	.a hundred thirty in (3.30 mm)	780 lb (350 kg)	eighteen lb (8.2 kg)
35	.375 in (9.fifty three mm)	.two hundred in (5.08 mm)	one,760 lb (800 kg)	eighteen lb (8.2 kg)
forty one	.500 in (twelve.70 mm)	.306 in (7.77 mm)	one,500 lb (680 kg)	eighteen lb (8.2 kg)
40	.500 in (twelve.70 mm)	.312 in (7.92 mm)	3,a hundred twenty five lb (1,417 kg)	31 lb (14 kg)
fifty	.625 in (fifteen.88 mm)	.four hundred in (ten.16 mm)	4,880 lb (2,210 kg)	forty nine lb (22 kg)
sixty	.750 in (19.05 mm)	.469 in (eleven.ninety one mm)	seven,030 lb (3,one hundred ninety kg)	70 lb (32 kg)
80	1.000 in (twenty five.forty mm)	.625 in (15.88 mm)	12,five hundred lb (5,700 kg)	125 lb (fifty seven kg)
100	1.250 in (31.75 mm)	.750 in (19.05 mm)	19,531 lb (8,859 kg)	195 lb (88 kg)
a hundred and twenty	one.five hundred in (38.10 mm)	.875 in (22.23 mm)	28,125 lb (twelve,757 kg)	281 lb (127 kg)
a hundred and forty	1.750 in (44.forty five mm)	one.000 in (twenty five.forty mm)	38,280 lb (17,360 kg)	383 lb (174 kg)
one hundred sixty	two.000 in (50.80 mm)	1.one hundred twenty five in (28.58 mm)	50,000 lb (23,000 kg)	five hundred lb (230 kg)
180	2.250 in (57.fifteen mm)	1.460 in (37.08 mm)	sixty three,280 lb (28,seven-hundred kg)	633 lb (287 kg)
200	2.five hundred in (63.50 mm)	one.562 in (39.67 mm)	78,a hundred seventy five lb (35,460 kg)	781 lb (354 kg)
240	three.000 in (seventy six.twenty mm)	one.875 in (forty seven.sixty three mm)	112,five hundred lb (51,000 kg)	one,000 lb (450 kg

For mnemonic needs, beneath is yet another presentation of key proportions from the identical common, expressed in fractions of an inch (which was component of the thinking guiding the selection of desired quantities in the ANSI regular):

Pitch (inches)	Pitch expressed in eighths	ANSI normal chain quantity	Width (inches)
one⁄4	2⁄eight	twofive	one⁄8
3⁄8	3⁄8	threefive	3⁄sixteen
1⁄two	4⁄8	four1	1⁄4
1⁄2	four⁄eight	four	five⁄16
five⁄eight	five⁄eight	five	3⁄8
three⁄4	6⁄8	6	1⁄2
one	eight⁄eight	eight	five⁄eight

Notes:
1. The pitch is the distance in between roller facilities. The width is the length between the hyperlink plates (i.e. marginally much more than the roller width to permit for clearance).
2. The correct-hand digit of the regular denotes 0 = standard chain, 1 = lightweight chain, 5 = rollerless bushing chain.
3. The left-hand digit denotes the variety of eighths of an inch that make up the pitch.
four. An “H” following the normal variety denotes heavyweight chain. A hyphenated number following the regular variety denotes double-strand (2), triple-strand (3), and so on. Thus 60H-3 denotes amount sixty heavyweight triple-strand chain.
 A standard bicycle chain (for derailleur gears) employs slim 1⁄2-inch-pitch chain. The width of the chain is variable, and does not have an effect on the load capacity. The far more sprockets at the rear wheel (historically 3-6, nowadays 7-twelve sprockets), the narrower the chain. Chains are bought according to the amount of speeds they are designed to operate with, for case in point, “ten speed chain”. Hub equipment or single pace bicycles use 1/2″ x 1/8″ chains, in which 1/8″ refers to the greatest thickness of a sprocket that can be employed with the chain.

Normally chains with parallel formed hyperlinks have an even quantity of back links, with every single slim website link adopted by a broad 1.Chains built up with a uniform sort of url, narrow at 1 and broad at the other end, can be manufactured with an odd amount of links, which can be an edge to adapt to a special chainwheel-distance on the other facet this sort of a chain tends to be not so powerful.

Roller chains created making use of ISO normal are occasionally named as isochains.

 

WHY Choose US 

one. Reputable Top quality Assurance System
two. Cutting-Edge Computer-Managed CNC Devices
3. Bespoke Answers from Highly Knowledgeable Experts
4. Customization and OEM Offered for Distinct Application
5. In depth Stock of Spare Areas and Components
six. Effectively-Produced Globally Marketing Network
seven. Productive Following-Sale Provider Method

 

The 219 sets of advanced automated manufacturing gear supply ensures for high solution good quality. The 167 engineers and technicians with senior expert titles can style and build merchandise to satisfy the actual needs of buyers, and OEM customizations are also offered with us. Our seem worldwide support community can give customers with timely right after-income specialized companies.

We are not just a maker and supplier, but also an sector expert. We function professional-actively with you to offer specialist guidance and merchandise tips in get to end up with a most cost efficient product obtainable for your certain application. The clients we serve around the world assortment from conclude consumers to distributors and OEMs. Our OEM replacements can be substituted wherever necessary and appropriate for both mend and new assemblies.

 

 

Ep prefabricated metal sprockets are created of C1045 steel, induction hardened or warmth-treated metal, 400 – five hundred BHN hardness. Make sure you specify the materials you need to have. Unless or else requested, the outdoors diameter of the hub need to be sufficient to accommodate the needed holes and keyways. Keys to these products are not provided except if asked for or installed on the shaft. Split sprockets for welding or break up sprockets for bolts give an inexpensive way to set up sprockets on shafts exactly where removing of the shaft assembly is prohibited. A lot of sizes of sprockets are geared up with holes, keyways, and established screws. Discs or partially accomplished sprockets are also stocked. For prolonged sprockets and idlers, specify the chain dimension utilised.
Roller sprockets are generally used in industrial and industrial purposes to transmit power to the chain by meshing with rollers on the chain, the enamel of which mate with the internal plates of the chain. A vast range of programs gain from these, like conveyor belts, huge industrial drives, robotics, electrical assembly, and far more.