Anti Climb 3D Bending Fence Mesh Panel Welding Machine

Anti Climb 3D Bending Fence Mesh Panel Welding Machine

3D Bending Fence Mesh Panel Welding Equipment

Mesh welding device collection:

Reinforcing mesh welding equipment, fence mesh welding device, animal cage welding device, steel grating welding device, roll mesh welding device, wedged wire monitor welding device, wire straightening and cutting equipment and many others.

Mesh weaving machine sequence:

Chain link fence device, barbed wire equipment, nail creating equipment, wire drawing equipment, expanded metallic mesh equipment, expanded metallic equipment, gabion mesh machine, hexagonal wire mesh device, crimped mesh equipment and so on.

Parameter of machine 

Design  DP-FP-2500A  Wire diameter  2.five-6mm/3-5mm
 Line wire space  50-300mm  Cross wire place  25/12.5mm-300mm
 Width of mesh  Max.two.5m  Length of mesh  Max.6m
 Welding electrodes  48pcs  Welding speed  50-75 moments/min
 Rated electrical electricity  125kva*6pcs  Needed power  Min.160kva
 Weight  4.2T  Overall measurement  5.4m*three.2*1.7m

Details of machine 

Main technologies 

     1.The management panel is much more intelligent, quite easy to work. (Panasonic PLC software)

     2.The longitude wires must be inserted into slot tunnels (forged iron substance), ideal for various diameter.

     3.The cross wires are fed from cross wire feeder, controlled by stage motor and SMC (Japan) air cylinder.

     4.Pure crimson copper (upper) and chromised bronze (reduced), tough.

     5.Clutch motor and helical equipment reducer connect the principal axis straight, welding steady.

     6.Casting drinking water-cooling welding transformers, higher efficiency. The welding diploma is altered by PLC.

     7.Panasonic (Japan) servo motor+planetary reducer and SMC (Japan) air cylinders for pulling mesh.

     8.The cable drag chain is Igus brand name, imported from Germany, not easily hang down.

Wire feeding way

      The longitude wires and cross wires need to be pre-straightened and pre-cut.

      1.The longitude wires are inserted into the slot tunnels manually.

      2.The cross wire are place into the cross wire feeder, which is managed by stage motor&SMC (Japan) air cylinders,automated falling.

Loading & delivery

Make contact with us 
Income:Elaine Lu
Fb account: ElaineLu357622


Anti Climb 3D Bending Fence Mesh Panel Welding Machine