China high quality Short Pitch Precision Roller Chains and Bush Chains 10b 48 Teeth Hub Sprocket wholesaler

Solution Description

SPROCKET  5/8” X 3/8”  10B Series SPROCKETS
 

For Chain Acc.to DIN8187 ISO/R 606
Tooth Radius  r3 16.0mm
Radius Width C 1.6mm
Tooth Width b1 nine.0mm
Tooth Width B1 nine.1mm
Tooth Width B2 twenty five.5mm
Tooth Width B3 forty two.1mm
10B Series ROLLER CHAINS  
Pitch fifteen.875 mm
Internal Width 9.sixty five mm
Roller Diameter 10.16 mm

 

 

Z de dp SIMPLEX DUPLEX TRIPLEX
dm D1 A dm D2 A dm D3 A
eight 47. 41.forty eight twenty five 10 25 twenty five 12 40 twenty five 12 fifty five
nine fifty two.six 46.forty two 30 ten 25 30 twelve forty thirty twelve fifty five
ten 57.five 51.37 35 10 twenty five 35 twelve forty 35 12 fifty five
11 63. 56.34 37 12 30 39 14 40 39 sixteen fifty five
twelve 68. 61.34 42 12 30 forty four 14 40 44 sixteen fifty five
13 73. 66.32 47 twelve thirty 49 14 40 49 16 55
14 78. seventy one.34 fifty two 12 30 54 14 40 54 16 fifty five
fifteen eighty three. 76.36 57 twelve 30 59 14 forty fifty nine 16 55
sixteen 88. 81.37 60 twelve thirty 64 sixteen forty five sixty four 16 60
seventeen 93. 86.39 sixty twelve thirty sixty nine sixteen 45 69 sixteen sixty
eighteen ninety eight.3 ninety one.42 70 fourteen thirty 74 sixteen forty five seventy four sixteen 60
19 103.3 ninety six.forty five 70 14 30 79 sixteen 45 seventy nine sixteen sixty
20 108.4 one hundred and one.forty nine 75 fourteen 30 eighty four sixteen forty five eighty four 16 60
21 113.four 106.fifty two seventy five sixteen thirty 85 sixteen 45 eighty five 20 sixty
22 118. 111.55 eighty sixteen 30 ninety 16 45 90 20 sixty
23 123.five 116.fifty eight eighty 16 thirty ninety five 16 45 ninety five 20 sixty
24 128.3 121.sixty two eighty sixteen 30 one hundred 16 forty five 100 20 sixty
twenty five 134. 126.66 eighty 16 30 one hundred and five 16 forty five one hundred and five 20 60
26 139. 131.70 eighty five 20 35 a hundred and ten 20 45 one hundred ten 20 sixty
27 144. 136.75 85 20 35 one hundred ten 20 45 110 20 sixty
28 148.seven 141.78 ninety 20 35 a hundred and fifteen 20 forty five a hundred and fifteen twenty sixty
29 153.8 146.eighty three ninety twenty 35 a hundred and fifteen twenty forty five a hundred and fifteen 20 sixty
30 158.eight 151.87 90 twenty 35 a hundred and twenty twenty forty five 120 twenty 60
31 163.nine 156.92 ninety five 20 35 120 20 forty five one hundred twenty 20 sixty
32 168.nine 161.95 ninety five twenty 35 one hundred twenty 20 forty five a hundred and twenty twenty sixty
33 174.five 167.00 ninety five 20 35 120 20 forty five a hundred and twenty twenty sixty
34 179. 172.05 95 twenty 35 120 twenty 45 120 20 60
35 184.1 177.ten 95 twenty 35 a hundred and twenty 20 45 120 20 sixty
36 189.1 182.fifteen a hundred 20 35 120 20 forty five one hundred twenty 25 60
37 194.two 187.20 one hundred 20 35 a hundred and twenty 20 45 a hundred and twenty 25 sixty
38 199.2 192.24 one hundred twenty 35 one hundred twenty 20 45 a hundred and twenty 25 sixty
39 204.2 197.29 a hundred 20 35 one hundred twenty twenty forty five a hundred and twenty 25 sixty
forty 209.3 202.34 a hundred 20 35 a hundred and twenty twenty forty five one hundred twenty 25 60
41 214.8 207.38 *a hundred twenty forty a hundred and twenty twenty fifty *one hundred thirty twenty five sixty
42 two,199 212.43 *100 20 forty one hundred twenty twenty fifty *one hundred thirty 25 60
43 224.nine 217.48 *one hundred 20 forty 120 20 50 *130 twenty five 60
forty four 230. 222.53 *one hundred twenty forty one hundred twenty 20 fifty *one hundred thirty twenty five 60
45 235. 227.58 *one hundred 20 forty *a hundred and twenty twenty fifty *130 25 sixty
forty six 240.1 232.63 *a hundred 20 forty *one hundred twenty twenty fifty *130 twenty five 60
forty seven 245.one 237.sixty eight *a hundred 20 forty *a hundred and twenty 20 fifty *a hundred thirty twenty five 60
48 250.2 242.seventy three *one hundred twenty forty *120 twenty fifty *a hundred thirty 25 60
49 255.2 247.seventy eight *100 twenty forty *one hundred twenty 20 50 *130 25 60
fifty 260.3 252.82 *one hundred twenty 40 *one hundred twenty 20 fifty *130 twenty five sixty
51 265.three 257.87 *100 twenty 40 *one hundred twenty 20 fifty *130 twenty five 60
52 270.4 262.92 *one hundred twenty forty *a hundred and twenty twenty 50 *one hundred thirty 25 60
53 275.four 267.97 *one hundred 20 40 *120 twenty fifty *one hundred thirty 25 sixty
54 280.5 273.03 *a hundred twenty forty *one hundred twenty 20 50 *one hundred thirty twenty five 60
55 285.5 278.08 *a hundred 20 forty *120 twenty 50 *a hundred thirty 25 60
56 290.six 283.13 *100 twenty 40 *a hundred and twenty twenty fifty *130 twenty five sixty
fifty seven 296. 288.18 *100 20 forty *a hundred and twenty 20 50 *one hundred thirty 25 sixty
58 three hundred.seven 293.23 *one hundred 20 43 *one hundred twenty 20 57 *a hundred thirty 25 64
59 305.seven 298.28 *one hundred 20 forty three *a hundred and twenty twenty 57 *a hundred thirty twenty five 64
sixty 310.8 303.33 *100 20 forty three *one hundred twenty 20 57 *130 25 sixty four
62 321.four 313.43 *a hundred twenty forty three *120 20 57 *one hundred thirty twenty five 64
sixty four 331.five 323.53 *one hundred 20 43 *one hundred twenty twenty 57 *one hundred thirty 25 67
65 336.five 328.fifty eight *100 20 forty three *120 twenty fifty seven *a hundred thirty twenty five 67
sixty six 341.6 333.sixty four *one hundred twenty 43 *one hundred twenty twenty fifty seven *130 twenty five 67
68 351.seven 343.74 *100 twenty forty three *a hundred and twenty 20 fifty seven *a hundred thirty twenty five sixty seven
70 361.8 353.84 *100 twenty 43 *one hundred twenty 20 fifty seven *130 twenty five 67
seventy two 371.nine 363.94 *a hundred 20 forty three *one hundred twenty twenty fifty seven *a hundred thirty twenty five sixty seven
seventy five 387.1 379.10 *one hundred 20 forty three *one hundred twenty twenty 57 *130 twenty five sixty seven
seventy six 392.one 384.fifteen *a hundred twenty forty three *one hundred twenty twenty 57 *a hundred thirty twenty five 67
seventy eight 402.2 394.twenty five *100 20 forty three *one hundred twenty twenty fifty seven *one hundred thirty twenty five sixty seven
eighty 412.three 404.36 *100 twenty forty three *130 20 fifty seven *130 twenty five sixty seven
85 437.6 429.62 *100 twenty 50 *one hundred thirty twenty 58 *130 twenty five 67
90 462.eight 454.88 *100 twenty 50 *130 twenty 58 *one hundred thirty twenty five sixty seven
ninety five 488.5 480.fourteen *100 twenty 50 *a hundred thirty 20 fifty eight *130 25 sixty seven
a hundred 513.4 505.forty *a hundred 20 fifty *a hundred thirty 20 fifty eight *a hundred thirty twenty five 67
a hundred and ten 563.nine 555.92 *100 20 50 *one hundred thirty twenty fifty eight *a hundred thirty twenty five sixty seven
114 584.one 576.13 *a hundred twenty fifty *a hundred thirty twenty fifty eight *one hundred thirty 25 sixty seven
one hundred twenty 614.four 606.45 *a hundred twenty fifty *130 twenty 58 *one hundred thirty twenty five 67
one hundred twenty five 639.seven 631.fifty one *a hundred twenty fifty *130 20 fifty eight *one hundred thirty 25 67

Recognize: *welding hub

Basic Data.
 

Product name  DIN ISO Regular Sprocket for Roller Chain
Materials Available  one. Stainless Steel: SS304, SS316, and so on
two. Alloy Metal: C45, 45Mn, 42CrMo, 20CrMo, and so forth
three. OEM according to your request
Floor Treatment method Warmth treatment, Quenching therapy, Higher frequency normalizing treatment method, Sprucing, Electrophoresis paint processing, Anodic oxidation treatment method, etc
Characteristic Fire Resistant, Oil Resistant, Heat Resistant, CZPT resistance, Oxidative resistance, Corrosion resistance, and so forth
Design criterion ISO DIN ANSI & Consumer Drawings
Size Buyer Drawings & ISO standard 
Software Industrial transmission gear
Package Wooden Situation / Container and pallet, or created-to-buy
Certification ISO9001: 2008 
Advantage Quality first, Support initial, Aggressive value, Fast supply
Supply Time 20 days for samples. 45 days for official order.

Set up AND Making use of

The chain  spoket, as a travel or deflection for chains, has pockets to keep the chain links with a D-profile CZPT area with flat facet surfaces  parallel to the centre aircraft of the chain back links, and outer surfaces at proper angles to the chain hyperlink centre aircraft. The chain hyperlinks are pressed firmly against the outer surfaces and every single of the side surfaces by the angled laying surfaces at the base of the pockets, and also the assist surfaces of the wheel physique jointly with the conclude sides of the webs fashioned by the major and trailing walls of the pocket.

Notice

When CZPT new chainwheels it is very essential that a new chain is equipped at the very same time, and vice versa. Utilizing an old chain with new sprockets, or a new chain with aged sprockets will result in fast use.

It is critical if you are setting up the chainwheels oneself to have the factory services handbook certain to your product. Our chainwheels are manufactured to be a immediate CZPT for your OEM chainwheels and as these kinds of, the set up need to be done according to your versions provider handbook.

During use a chain will stretch (i.e. the pins will put on creating extension of the chain). Employing a chain which has been stretched a lot more than the earlier mentioned greatest allowance brings about the chain to ride up the enamel of the sprocket. This brings about injury to the ideas of the chainwheels enamel, as the pressure transmitted by the chain is transmitted entirely by means of the top of the tooth, relatively than the complete tooth. This outcomes in extreme wearing of the chainwheel.
 

FOR CHAIN STHangZhouRDS

Requirements companies (such as ANSI and ISO) sustain expectations for design, dimensions, and interchangeability of transmission chains. For example, the following Table exhibits info from ANSI standard B29.1-2011 (Precision Electrical power Transmission Roller Chains, Attachments, and Sprockets) designed by the American Culture of Mechanical Engineers (ASME). See the references[8][9][10] for additional data.

ASME/ANSI B29.1-2011 Roller Chain Common SizesSizePitchMaximum Roller DiameterMinimum Ultimate Tensile StrengthMeasuring Load25

ASME/ANSI B29.1-2011 Roller Chain Regular Measurements
Measurement Pitch Maximum Roller Diameter Bare minimum Supreme Tensile Power Measuring Load
twenty five .250 in (6.35 mm) .one hundred thirty in (3.30 mm) 780 lb (350 kg) eighteen lb (8.2 kg)
35 .375 in (9.fifty three mm) .200 in (5.08 mm) 1,760 lb (800 kg) 18 lb (8.2 kg)
41 .five hundred in (twelve.70 mm) .306 in (7.seventy seven mm) 1,five hundred lb (680 kg) eighteen lb (8.2 kg)
forty .five hundred in (12.70 mm) .312 in (7.92 mm) 3,a hundred twenty five lb (1,417 kg) 31 lb (fourteen kg)
50 .625 in (15.88 mm) .400 in (10.sixteen mm) four,880 lb (2,210 kg) forty nine lb (22 kg)
sixty .750 in (19.05 mm) .469 in (eleven.91 mm) seven,030 lb (3,one hundred ninety kg) 70 lb (32 kg)
80 1.000 in (25.40 mm) .625 in (fifteen.88 mm) 12,five hundred lb (5,seven hundred kg) 125 lb (fifty seven kg)
a hundred one.250 in (31.seventy five mm) .750 in (19.05 mm) 19,531 lb (8,859 kg) 195 lb (88 kg)
120 one.500 in (38.10 mm) .875 in (22.23 mm) 28,125 lb (12,757 kg) 281 lb (127 kg)
a hundred and forty one.750 in (forty four.45 mm) one.000 in (twenty five.forty mm) 38,280 lb (seventeen,360 kg) 383 lb (174 kg)
a hundred and sixty 2.000 in (50.eighty mm) one.a hundred twenty five in (28.fifty eight mm) 50,000 lb (23,000 kg) 500 lb (230 kg)
one hundred eighty 2.250 in (57.fifteen mm) 1.460 in (37.08 mm) sixty three,280 lb (28,seven hundred kg) 633 lb (287 kg)
two hundred two.500 in (63.fifty mm) one.562 in (39.67 mm) 78,one hundred seventy five lb (35,460 kg) 781 lb (354 kg)
240 3.000 in (seventy six.twenty mm) one.875 in (forty seven.sixty three mm) 112,five hundred lb (fifty one,000 kg) one,000 lb (450 kg

For mnemonic functions, below is yet another presentation of key dimensions from the identical common, expressed in fractions of an inch (which was part of the thinking powering the option of favored figures in the ANSI normal):

Pitch (inches) Pitch expressed
in eighths
ANSI normal
chain quantity
Width (inches)
14 two8 twofive 18
38 3eight 35 three16
one2 48 four1 onefour
12 four8 4 5sixteen
5eight 5eight 5 3eight
3four 6eight 6 one2
1 8eight 8 five8

Notes:
one. The pitch is the distance among roller centers. The width is the distance between the url plates (i.e. somewhat far more than the roller width to enable for clearance).
two. The proper-hand digit of the regular denotes 0 = typical chain, 1 = lightweight chain, 5 = rollerless bushing chain.
three. The remaining-hand digit denotes the variety of eighths of an inch that make up the pitch.
4. An “H” adhering to the standard amount denotes heavyweight chain. A hyphenated quantity pursuing the regular amount denotes double-strand (2), triple-strand (3), and so on. Hence 60H-3 denotes amount sixty heavyweight triple-strand chain.
 A typical bicycle chain (for derailleur gears) makes use of slim 1⁄2-inch-pitch chain. The width of the chain is variable, and does not affect the load ability. The more sprockets at the rear wheel (traditionally 3-6, these days 7-twelve sprockets), the narrower the chain. Chains are marketed in accordance to the quantity of speeds they are designed to operate with, for instance, “10 pace chain”. Hub gear or single velocity bicycles use 1/2″ x 1/8″ chains, exactly where 1/8″ refers to the optimum thickness of a sprocket that can be utilized with the chain.

Normally chains with parallel shaped hyperlinks have an even number of back links, with every slender link adopted by a broad 1.Chains constructed up with a uniform type of url, narrow at 1 and wide at the other stop, can be made with an odd number of back links, which can be an benefit to adapt to a special chainwheel-length on the other side this kind of a chain tends to be not so strong.

Roller chains made using ISO regular are sometimes referred to as as isochains.

 

WHY Decide on US 

1. Dependable Good quality Assurance System
two. Cutting-Edge Pc-Controlled CNC Equipment
3. Bespoke Answers from Hugely Knowledgeable Specialists
four. Customization and OEM Available for Particular Software
five. In depth Inventory of Spare Areas and Equipment
six. Effectively-Designed Globally Advertising and marketing Community
7. Effective Soon after-Sale Provider System

 

The 219 sets of superior automatic manufacturing equipment provide assures for high item top quality. The 167 engineers and professionals with senior skilled titles can layout and create items to meet the precise requires of clients, and OEM customizations are also available with us. Our seem world-wide services network can give buyers with well timed after-sales technical services.

We are not just a manufacturer and provider, but also an sector specialist. We perform professional-actively with you to supply expert advice and product suggestions in buy to conclude up with a most value effective item offered for your distinct application. The customers we serve globally assortment from conclude users to distributors and OEMs. Our OEM replacements can be substituted anywhere necessary and suitable for equally repair and new assemblies.

 

 

Sprockets are manufactured to ISO606 and ASME B29.one hundred expectations, offered in plate, one and double hub configurations, constructed from substantial good quality carbon metal, optional tapered bushings simplify installation and removal, treatment options obtainable on ask for, like black oxide
Bushing Sprockets: Bushing sprockets can simplify chain method upkeep by replacing only worn sprocket assemblies, whilst the bushings can even now be reused. The bushing also has a tightly tapered mating surface area that can transmit larger torques than simple vital elements. Near-fitting surfaces provide better overall performance in applications with hefty start off/quit operations or shock hundreds.

China high quality Short Pitch Precision Roller Chains and Bush Chains 10b 48 Teeth Hub Sprocket     wholesaler